2×Car Side Body Decals(inlcude left and right sides). Tools: watering can, soapy water, clean rag, scraper, blow dryer. Clean the car surface, spurt soapy water onto installation location(for reducing the viscosity and convenient for adjusting, soapy water can help avoiding bubbles during installation).Slowly removed the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape. Adjust the car sticker to the right position. Use a scraper to scrape the surface of car sticker until there is no bubble. Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.
If there is still bubbles, use a needle to release the air inside bubble, and make the surface plain. Make the innerside of car sticker as dry as possible, could use a blow dryer.
Do not put the car under hot sun in 48 hours. Do not wash the car in 48 hours. We are glad resolve the problem for you.So be kind and don't leave that 1,2,3, Low ratings and Neutral feedback. We care about our valued buyers, our customer Service staffs will be very glad to help you. If you have any questions.
We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Decals & Vinyls". The seller is "lightinheart" and is located in this country: CN.
This item can be shipped worldwide.